Cecotec Bolero DressCode 8900 Inverter A Handleiding (468 Pagina's)

Handleiding

/ 468

Je bekijkt pagina 132 van 468

Bolero DressCode 8900 Inverter FullColor A

Bolero DressCode 8900 Inverter FullColor Steel A

Bolero DressCode 8900 Inverter FullColor Ice Blue A

132

ENGLISH

Does not turn on Appliance is not fully plugged in or not plugged in enough

to make contact.

No power is reaching the socket. Check the fuses

and control and protection elements of the electrical

installation.

Washing cycle does not

start

The door is not properly closed.

The START/PAUSE icon has not been pressed.

The water tap has not been turned on to allow water to

ow into the appliance.

A delay end function has been congured.

No water or detergent

enters the drum. Error

“E02” appears on the

display

Water supply hose is kinked or bent.

The water supply hose is not connected to the water

supply.

The water pressure is too low.

The water tap has not been opened to allow water to ow

into the machine.

There is no water supply in the dwelling.

The mesh lter in the water supply hose and/or the water

inlet valve is/are blocked.

Tap and/or water supply pipe is/are frozen.

The START/PAUSE icon has not been pressed.

There is already enough water in the drum.

Water discharge when

the programme starts

This is not an issue. Do not open the door to pour water

directly into the drum before the programme is run,

otherwise the machine may discharge the water that was

poured into the drum when the programme was started.

The water level is too

low when the machine is

washing.

This is not an issue. The water consumption in the

washing cycle of this appliance is relatively small, the

water level in the washing cycle is lower than that of

other types of washing machines.

Overlling of water

during operation of the

washing cycle

If the water level drops, the machine will automatically

recover the water.

When the amount of laundry to be washed is too large,

the appliance can automatically ll the water several

times during the operation of the washing cycle.

Too much foam in the

drum or foam overows

from the detergent

drawer.

The detergent is not suitable for machine washing (must

show the text “for washing machines” or “hand and

machine wash” or similar).

Too much detergent was used; less detergent is required

in soft water.

/ 468

Bekijk gratis de handleiding van Cecotec Bolero DressCode 8900 Inverter A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.