Cecotec Bolero DressCode 6150 handleiding

Wasmachine

Cecotec

215 pagina's

PDF beschikbaar

Handleiding

/ 215

Je bekijkt pagina 53 van 215

BOLERO DRESSCODE 6150 INVERTER A

BOLERO DRESSCODE 7150 INVERTER A

BOLERO DRESSCODE 7150 INVERTER STEEL A

BOLERO DRESSCODE 6150 INVERTER A

BOLERO DRESSCODE 7150 INVERTER A

BOLERO DRESSCODE 7150 INVERTER STEEL A

105104

ENGLISH ENGLISH

- Fixed spanner

- Caps (x4)

- Unpack the appliance and keep the original packaging and materials in a safe place. It

will help prevent any damage if the appliance needs to be transported in the future. In

case the original packaging is disposed of, make sure all packaging materials are recycled

accordingly.

- To remove the lower part of the packaging, do not tilt the appliance on its front side.

Carefully tilt to the side. Never place the appliance directly on the oor on its back or front

part.

- Make sure all parts and accessories are present and in good conditions. If there is any piece

missing or not in good condition, contact the ocial Cecotec Technical Support Service

immediately.

- Keep all packaging materials away from children.

- Before using the washing machine, the appliance shall be calibrated.

- Before the rst wash, you must perform a complete washing cycle without laundry (i.e.

with an empty drum).

- Make sure that all pockets are empty. Sharp and rigid items such as coins, brooches, nails,

screws or stones may cause serious damage to this appliance.

3. APPLIANCE INSTALLATION

- Make sure that the temperature of the places where the appliance is installed or placed is

higher than 0 ºC.

- Install the washing machine correctly according to this instruction manual. Keep the

washing machine base well-ventilated when it is placed on a carpeted oor. Keep the

place neat and tidy as damage caused by insects is not covered by the appliance warranty.

Transport bolts

The appliance is equipped with transport bolts at the back to prevent internal damage during

transport.

Removing the transport bolts (Fig. 3)

1. 4 bolts are installed to prevent internal damage during transport. Remove the bolts before

using the appliance.

- If the bolts are not removed, violent vibrations, noise and problems will occur and may

even lead to serious damage.

2. Use the spanner provided to loosen the 4 bolts.

3. Slightly twist the rubber on the bolt and then pull out the bolts. Store the bolts and the

spanner.

1. PARTS AND COMPONENTS

Fig. 1.

1. Detergent/fabric softener drawer

2. Door

3. Drum

4. Adjustable feet

5. Body

6. Power cable

7. Control panel

8. Water inlet

Accessories

Fig. 2.

1. Instruction manual

2. Cold water supply hose

3. Fixed spanner

4. Caps for transport bolt holes

NOTE:

The graphics in this manual are schematic representations and may not exactly match the

device.

2. BEFORE USE

- This appliance is packaged in a way as to protect it during transport. Take the appliance

out of its box and remove all packaging materials. You can keep the original box and

other packaging elements in a safe place to prevent damage to the device if you need

to transport it in the future. In case the original packaging is disposed of, make sure all

packaging materials are recycled accordingly.

- Make sure all parts and components are included and in good conditions. If there is any

piece missing or in bad conditions, contact the ocial Cecotec Technical Support Service

immediately.

Box content

- Instruction manual

- Water supply hose

/ 215

Bekijk gratis de handleiding van Cecotec Bolero DressCode 6150, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.