Cecotec Bolero DressCode 10980 Direct Drive handleiding

Wasmachine

Cecotec

235 pagina's

PDF beschikbaar

Handleiding

/ 235

Je bekijkt pagina 57 van 235

BOLERO DRESSCODE 10980 DIRECT DRIVE STEEL A/ BOLERO DRESSCODE 10980 DIRECT DRIVE BLUE A

BOLERO DRESSCODE 12980 DIRECT DRIVE STEEL A / BOLERO DRESSCODE 12980 DIRECT DRIVE BLUE A

BOLERO DRESSCODE 10980 DIRECT DRIVE STEEL A/ BOLERO DRESSCODE 10980 DIRECT DRIVE BLUE A

BOLERO DRESSCODE 12980 DIRECT DRIVE STEEL A / BOLERO DRESSCODE 12980 DIRECT DRIVE BLUE A

113112

ENGLISH ENGLISH

Installation

Do not place the washing machine outdoors or in any place where the temperature is below 0

°C. It must be placed on a solid, at oor with a slope of less than 1°. If the oor on which you

have placed the washing machine is uneven, it may become unbalanced. To avoid this, adjust

the adjustable feet until it is completely stable. To check if it is correctly levelled, press down

on the top cover. If it wobbles, the feet must be readjusted.

NOTE: if the appliance is in an environment where the temperature is below 0 °C, do not

operate it.

Feet adjustment (Fig. 4)

Using the provided spanner, tighten the nuts at the bottom of the four feet to keep the washer

stable.

After levelling, use the spanner to tighten the nuts on the top of the feet to lock them.

Fig. 4 key:

1. Turn down

2. Turn up

3. Lock

4. Hold-down nut

5. Jam nut

Fitting the rat protection panel (only for those models including it)

First, tilt the washing machine backwards.

Press the tab as shown in gure 5.

Make sure that the felt side of the rat protection panel is facing inwards and that the arrow

is pointing forwards. Then, place the panel on the bottom of the washing machine and

secure all fasteners.

Remove the 8 screws from the accessory kit and secure them rmly in the holes indicated.

Note: if the fasteners or screws are not properly fastened, vibrations and noise will occur.

Water supply hose connection

Align and connect the hose to the water inlet valve at the rear of the machine (Fig. 6).

Fig. 6 key:

1. Water inlet valve

2. Water inlet valve

3. Water supply hose

- The water supply pressure must be between 30 kPa and 1000 kPa.

- Check the rubber seals on both sides of the hose.

- Do not damage the valve thread when connecting the hose.

- If the water supply exceeds 1000 kpa, install a pressure regulator (not included).

- Check hoses regularly. Make sure that the hoses are not damaged or criss-crossed.

- Connect the other end of the water supply hose to an external threaded tap with a diameter

of 1/2” (Fig. 7).

Fig. 7 key:

1. Threaded tap

2. Adapter

3. Water supply hose

- Screw on the adapter to ensure that it is watertight, then attach the water supply hose.

- If you have a 3/4” external threaded tap, screw the water supply hose directly onto it.

- Connect the hose to the water inlet rmly by hand and then tighten another 2/3 turn with

pliers.

- Do not over-tighten the hose as this could damage the valves and cause leaks.

- After connecting the water supply hose, open the tap to remove foreign substances (dirt,

sand or sawdust) from the hose. Make sure that there are no leaks.

Note: to ensure its performance, the washing machine has been subjected to a water injection

test before leaving the factory. Therefore, there may be residual water in the drum, door gasket

and on the glass. This is normal.

- The washing machine is designed for domestic use.

- Please, close the tap if it is not going to be used for a long time (e.g. holidays).

- Packaging materials (e.g. plastic, foam) can damage the child’s safety and cause

suocation.

Warning: PLACE ALL PACKAGING MATERIALS OUT OF THE REACH OF CHILDREN.

Installation of the drain hose

To avoid the siphon eect, the drain hose should be positioned at a height of 0.85 to 1.25 m

above the oor. Also, the end of the hose must not be immersed in water. If the drain hose is

long, you can cut o part of it. Do not force it into the appliance, as this will cause abnormal

noises during operation (Fig. 8).

/ 235

Bekijk gratis de handleiding van Cecotec Bolero DressCode 10980 Direct Drive, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.