Cecotec Bolero DressCode 10980 Direct Drive handleiding

Wasmachine

Cecotec

235 pagina's

PDF beschikbaar

Handleiding

/ 235

Je bekijkt pagina 56 van 235

BOLERO DRESSCODE 10980 DIRECT DRIVE STEEL A/ BOLERO DRESSCODE 10980 DIRECT DRIVE BLUE A

BOLERO DRESSCODE 12980 DIRECT DRIVE STEEL A / BOLERO DRESSCODE 12980 DIRECT DRIVE BLUE A

BOLERO DRESSCODE 10980 DIRECT DRIVE STEEL A/ BOLERO DRESSCODE 10980 DIRECT DRIVE BLUE A

BOLERO DRESSCODE 12980 DIRECT DRIVE STEEL A / BOLERO DRESSCODE 12980 DIRECT DRIVE BLUE A

111110

ENGLISH ENGLISH

1. PARTS AND COMPONENTS

Fig. 1.

1. Detergent drawer

2. Door

3. Drum

4. Adjustable feet

5. Water supply valve

6. Control panel

7. Power cable

8. Body

9. Drain pump cover

Accessories

Fig. 2.

1. Instruction manual

2. Cold water supply hose

3. Fixed spanner

4. Caps for transport bolt holes

5. Rat protection panel (depending on model)

6. Screws (x8)

NOTE:

The graphics in this manual are schematic representations and may not exactly match the

device.

2. BEFORE USE

- This appliance is packaged in a way as to protect it during transport. Take the appliance

out of its box and remove all packaging materials. You can keep the original box and

other packaging elements in a safe place to prevent damage to the appliance if you need

to transport it in the future. In case the original packaging is disposed of, make sure all

packaging materials are recycled accordingly.

- Make sure all parts and components are included and in good conditions. If there is any

piece missing or in bad conditions, contact the ocial Cecotec Technical Support Service

immediately.

Box content

Washing machine

Instruction manual

Cold water supply hose

Fixed spanner

Caps for transport bolt holes

Rat protection panel (depending on model)

Screws p56-x8 pcs (depending on model)

3. INSTALLATION

- Make sure that the temperature of the places where the appliance is installed or placed is

higher than 0 ºC.

- Install the washing machine correctly according to this instruction manual and local

regulations. Keep the place neat and tidy as damage caused by animals or insects is not

covered by the appliance warranty.

Unpacking

Completely remove the outer packaging of the washing machine.

Transport bolts

The appliance is equipped with 4 transport bolts at the back to prevent internal damage during

transport.

Removing the transport bolts (Fig. 3)

1. 4 bolts are installed to prevent internal damage during transport. Remove the bolts before

using the appliance.

- If the bolts are not removed, violent vibrations, noise and problems will occur and may

even lead to serious damage.

2. Use the spanner provided to loosen the 4 bolts by turning them counterclockwise.

3. Slightly twist the rubber on the bolt and then pull out the bolts. Store the bolts and the

spanner.

- The bolts must be retted when the appliance is transported again.

4. Use the provided caps to seal the screw holes.

Cleaning up the surroundings

- It is recommended to clean the wall and oor.

- Install the washing machine on a hard and stable oor (wooden oor is not recommended).

- Do not place dirty laundry or other items on top of the appliance, otherwise it may aect

the normal operation.

/ 235

Bekijk gratis de handleiding van Cecotec Bolero DressCode 10980 Direct Drive, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.