Cecotec Bolero CoolMarket UF 155 Handleiding (202 Pagina's)

Handleiding

/ 202

Je bekijkt pagina 61 van 202

BOLERO COOLMARKET TT UF 155 WHITE E 61

ENGLISH

b. Screw hole cover

11. Change the handle on the left side of the door to the right side. Fig. 14

Warning!

When changing the opening side of the door, the freezer must not be connected to the mains.

Remove the plug from the socket before starting.

4. OPERATION

Control panel

The control panel that regulates the freezer compartment temperature is located inside the

freezer compartment. When the freezer is switched on for the rst time, the icons on the

display light up. Fig. 15

Temperature control for optimal food preservation

We suggest that, when you rst start the freezzer, set the temperature to -18ºC. If you wish to

change the temperature, follow the instructions below.

NOTE: high temperature settings can accelerate food wastage.

Warning:

- When a temperature is set, it is the average temperature for the entire freezer.

- Temperatures inside each freezer drawer may vary from the temperatures displayed on

the panel, depending on the amount of food you store, where you place it, the installation

conditions, etc. A high or low ambient temperature may also aect the temperature inside

the freezer.

Fast Freezing mode

- The Fast Freezing mode will quickly lower the freezer temperature to allow food to freeze

faster. In this way, vitamins and nutrients of fresh food are preserved for a longer period

of time.

- Press the TEMPºC/Fast Freezing button for approximately 3 seconds to select the super

freeze function. The display will show “- 24” (ºC) and the indicator will light up.

- Several hours before putting fresh food in the freezer, activate the Fast-Freezing function

to prevent an unwanted temperature rise.

/ 202

Bekijk gratis de handleiding van Cecotec Bolero CoolMarket UF 155, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.