Handleiding
Je bekijkt pagina 114 van 220
TV LED A3 SERIES ALH30032 / ALH30032S
114
ENGLISH
- Automatic service update: Select On or O.
Antenna adjustment
- Use to select the ANTENNA, then press OK to enter.
Fig. 22
- Automatic tuning: Press OK to start the automatic search process. The search may take
a few minutes.
- Press and select YES to exit the search.
- Manual Tuning: Use to select and set the Channel Number and Frequency (KHz),
then select Start Scan to scan the channel.
- LCN: Select On or O.
- Automatic update of the automatic service: Select On or O.
Satellite adjustment
- Use to select the SATELLITE, then press OK to enter.
Fig. 23
- Satellite tuning: select satellite and search for channel.
- Automatic service update: select on or o.
- LCN: Select On or O.
Fig. 24
- Press Scan to enter the channel scan settings and select the desired item.
Fig. 25
- Network: Use the network ID to search for channels.
- Default: Use the default transponder to search the channels.
- Blind scan: Search of all frequencies.
4. REMOTE CONTROL
Fig. 26
Make sure that there are no obstacles between the remote control and the infrared sensor and
that sunlight or other light sources are not reected on them.
Pair the bluetooth* remote control with the TV
- The Bluetooth* remote control, which is mainly used to control the TV using the Google
voice assistant, needs to be paired with the TV at rst power on or later by following the
steps below:
1. Press to go to the home page.
2. Press to access “RC Pairing”.
3. Follow the “setup tips page”, press OK and at the same time.
Bekijk gratis de handleiding van Cecotec ALH30032, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cecotec |
| Model | ALH30032 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 22322 MB |
