CDA CTE92SS handleiding

16 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 12 van 16
12 | Instruction Manual
Positioning Your Extractor
When the extractor is to be
installed above an electric,
ceramic or induction hob, the
minimum distance between the
hob and extractor must be at
least 550mm.
When the extractor is to be
installed above a gas hob, the
minimum distance between the
hob and extractor must be at
least 650mm.
If the instructions provided with your gas hob state that the required
distance between the hob and extractor must be greater than 650mm,
then that is the distance that should be observed; this is a legal
requirement and may lead to your hob being disconnected from the
gas supply and the installation being
reported under RIDDOR (The
height should be measured from the
top of the burners).
IN THE ABSENCE OF ANY INSTRUCTIONS SUPPLIED WITH
THE GAS
HOB, THE MINIMUM
DISTANCE BETWEEN THE HOB AND
EXTRACTOR MUST BE AT LEAST 650mm.
Important: The CTE62SS is intended for use above a hob of width
60cm or less. The CTE92SS is intended for use above a hob of no
more than 90cm.
Fig 7.
h = min 550mm
h = min 650mm
h

Bekijk gratis de handleiding van CDA CTE92SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkCDA
ModelCTE92SS
CategorieAfzuigkap
TaalNederlands
Grootte1206 MB

Caratteristiche Prodotto

Kleur van het productRoestvrijstaal
Ingebouwd displayNee
Gewicht8000 g
Breedte898 mm
Diepte494 mm