Cartoni Lifto 25 handleiding

Handleiding

12345678910111213141516171819202122232425262728/ 28

Afdrukken

Je bekijkt pagina 20 van 28

20

! Items whose center of gravity (CG) is too close to the

opened LIFTO 25 base triangle (PTZ T-Bar, Teleprompt-

ers, ecc.) could cause the LIFTO 25 to p over; use addi-

onal precauon to avoid accidents.

6.4.2 lIghtWeIght dolly (d833)

Assembling

The LIFTO 25 has been designed to be compable with the CARTONI

Lightweight Dolly (D833), to in order to conveniently move the LIFTO 25

around the studio or set. To mount the LIFTO 25 on the dolly proceed as

follows.

Firstly, remove the three orientable feet (15) disengaging the rubber band

(14) for each foot. Then, remove each foot (15) pping it around its spheri-

cal seat unl snapping out the foot itself.

Completely open the dolly and place it on an even surface, engaging the

brake of each wheel so that the dolly cannot move during the LIFTO 25

installaon.

Release the spreader knob (4).

Place the spherical seat of one leg (13) on the corresponding sphere of the

dolly and snap-in.

Extend as much as needed the spreader arm of the leg pushing the adjust-

ing buon (5) and extend the spreader arm of a second leg (13), also.

Couple the second leg (13) seat on the corresponding sphere of the dolly

and snap-in it, too.

Subsequently, extend by the necessary amount the spreader arm of the

third leg pushing the adjusng buon (5), place the third leg (13) seat on

the corresponding sphere of the dolly and snap in the leg.

12345678910111213141516171819202122232425262728/ 28

Bekijk gratis de handleiding van Cartoni Lifto 25, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Cartoni (Niet gecategoriseerd)

Handleiding bekijken

Cartoni P40

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd