Handleiding
Je bekijkt pagina 24 van 58
EN - 8
Par Description
Factory setting Setting 1:
Speed from
potentiometer
Setting 2:
Speed from
contact
Setting 3:
Speed on the
keypad
Eur
Level 1 parameters
1 Minimum speed (Hz) 0 20
2 Maximum speed (Hz) 50 0.55 kW motor: 97 , 1.1 kW motor: 60 , 1.4 kW motor: 65
3 Acceleration ramp-up (s / 100 Hz) 5 5
4 Deceleration ramp-down (s / 100 Hz) 10 10
5 Inverter conguration AI.AV AI.AV Pr Pad
6 Nominal motor current (A) Inverter rating
230 V /
: 1 motor: 0.55 kW: 2.4; 1.1 kW: 4.2; 1.4 kW: 5
2 motors: 0.55 kW: 4.8; 1.1 kW: 8.4; 1.4 kW: 10
400 V / Y: 1 motor: 0.55 kW: 1.4; 1.1 kW: 2.4; 1.4 kW: 2.9
2 motors: 0.55 kW: 2.8; 1.1 kW: 4.8; 1.4 kW: 5.8
7 Nominal speed (rpm) 1500 0.55 kW motor: 1390; 1.1 kW motor: 2880; 1.4 kW motor: 2839
8 Nominal motor voltage (V) 230/400 230/400 230/400 230/400
9 Motor output factor (cos φ) 0.85 0.55 kW motor: 0.8; 1.1 kW motor: 0.81; 1.4 kW motor: 0.88
10 Access to the parameters L1 L2
Level 2 parameters
11 On/Off logic selection 0 0
12 Validation of the brake control diS diS
13 Not used
14 Not used
15 Pulse mode reference (Hz) 1.5 1.5
16 Analogue input mode 1 (mA) 4-.20 Volt 4-.20 4-.20
17 Validation of negative preset speeds OFF OFF
18 Preset speed 1 (Hz) 0 Speed 1
19 Preset speed 2 (Hz) 0 Speed 2
20 Preset speed 3 (Hz) 0 Speed 3
21 Preset speed 4 (Hz) 0 Speed 4
22 Load display unit Ld A A A
23 Speed display unit Fr Fr Fr Fr
24 User scale setting 1 1 1 1
25 User security code 0 3-digit code 3-digit code 3-digit code
26 Not used
27 Keypad reference when powering on 0 0 Last 0
28 Copying parameters no No
29 Loading of default settings no No
30 Selection of soft start mode 1 1
31 Selection of stop mode 1 0
32 Dynamic U/f selection OFF ON
33 Flying restart selection 0 2
34 Mode selection (terminal B7) dig Dig
35 Logic output control (terminal B3) n=0 n=0
36 Analogue output control (terminal B1) Fr Fr
37 Maximum switching frequency (kHz) 12-18 12 - 18 (max)
38 Auto calibration 0 0
39 Nominal motor frequency (Hz) 50 50
40 Number of motor poles Auto Auto
41 Voltage mode selection Ur l Ur I
42 Voltage boost at low frequency (%) 3 3
43 Transmission speed by serial link 19.2 19.2
44 Serial link address 1 1
45 Software version
46 Brake opening current threshold (%) 50 50
47 Brake opening current threshold (%) 10 10
48 Brake opening frequency (Hz) 1 1
49 Brake closing frequency (Hz) 2 2
50 Time delay before brake opening (s) 1 1
51 Brake opening time delay (s) 1 1
52 Fieldbus node address 0 0
53 Fieldbus transmission speed 0 0
54 Fieldbus diagnostics 0 0
55 Last switch to safety mode 0 0
Bekijk gratis de handleiding van Carrier 39CQ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Carrier |
| Model | 39CQ |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 9883 MB |
