Carlsbro CSD25M handleiding
Handleiding
Je bekijkt pagina 19 van 32
Bass drum control type selection
!
Press the TRIGGER button a sixth time to enter the bass drum control type selection bd?. !
The CSD25M allows you to upgrade your control pedal to a hardware bass pad (available
separately).!
bd1 - Setting for included kick control pedal.!
bd2 - Setting for hardware 2” rubber floor bass pad with stand and bass drum pedal with beater.!
bd3 - Setting for hardware 8” mesh bass drum pad with stand and bass drum pedal with beater. !
Local control!
!
Press the TRIGGER button a seventh time to adjust the local MIDI control setting, used to control
the connection between the trigger and the controller.!
Lon: Default, the pads are connected with the module to send MIDI data to your MIDI source.!
LoF: The sounds on the module are controlled by MIDI data from a MIDI source, and not by the
pads.!
Factory reset
!
Press and hold the SAVE and EXIT buttons together for 5 seconds.!
The screen will display ALL.!
Press the SAVE button to fully reset the module to its factory status.!
OR!
Press the KIT +/- buttons to reset an individual USER drum kit.!
The Screen will show U01, use the adjustment wheel to select the kit you wish to reset."
Press the SAVE button to reset the selected USER drum kit to its factory status. !
18
Bekijk gratis de handleiding van Carlsbro CSD25M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Carlsbro |
| Model | CSD25M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5159 MB |
