Caple WMI3100 handleiding
Handleiding
Je bekijkt pagina 19 van 64
19Instruction manual WMi3100Please keep this instruction manual for future reference
NOTE:
Remove the transit bolts before using the machine for the rst time. Faults occurring due to the
machine being operated with transit bolts tted are out of the scope of the warranty.
During the removal of the bolts, spacer tubes fall inside the product. These can be removed
by tilting the product forward and recovering them from the oor or inside the base of
the machine.
ADJUSTING THE FEET / ADJUSTING ADJUSTABLE STAYS
Removing the Transit Bolts
Before operating the washing machine,
remove the 4 transit bolts and rubber
spacers from the rear of the machine.
may cause heavy vibration, noise and
malfunction of the machine and void the
Loosen the transit bolts by turning
them anticlockwise with an appropriate
Remove the transit bolts with a straight
Fit the plastic blanking caps supplied in
the accessories bag into the gaps left
by the removal of the transit bolts. The
transit bolts should be stored for future
Remove the transit bolts
before using the machine for the first time.
Faults occurring due to the machine being
operated with transit bolts fitted are out of
During the removal of the bolts, spacer
tubes fall inside the product. These can be
removed by tilting the product forward and
recovering them from the floor or inside
the base of the machine.
Adjusting the Feet /
Adjusting Adjustable Stays
1
Do not install your machine on a surface
ventilation at the base.
To ensure quiet and vibration-free
operation of your machine, install it on a
firm surface.
You can level your machine using the
(using the appliance
when the feet are not level can cause
the furniture door to knock when in use).
Loosen the plastic locking nut.
To increase the height of the machine,
turn the feet clockwise. To decrease
the height of the machine, turn the feet
anticlockwise.
Once the machine is level, tighten the
locking nuts by turning them clockwise.
Never insert cardboard, wood or other
similar materials under the machine to
level it.
When cleaning the ground on which
the machine is located, take care not to
disturb the level of the machine.
Electrical Connection
Your Washing Machine requires a 220-
mains supply.
1. Do not install your machine on a surface [such as carpet] that would prevent ventilation at
the base.
› To ensure quiet and vibration-free operation of your machine, install it on a rm surface.
› You can level your machine using the adjustable feet [using the appliance when the feet
are not level can cause the furniture door to knock when in use].
› Loosen the plastic locking nut.
Bekijk gratis de handleiding van Caple WMI3100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Caple |
| Model | WMI3100 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 6400 MB |