Caple WMI3100 handleiding
Handleiding
Je bekijkt pagina 18 van 64
18 Instruction manual WMi3100 Please keep this instruction manual for future reference
INSTALLATION
REMOVING THE TRANSIT BOLTS
3.1 Removing the Transit Bolts
X X4 4
X4
1
3
2
4
Before operating the washing machine,
remove the 4 transit bolts and rubber
spacers from the rear of the machine.
may cause heavy vibration, noise and
malfunction of the machine and void the
Loosen the transit bolts by turning
them anticlockwise with an appropriate
Remove the transit bolts with a straight
Fit the plastic blanking caps supplied in
the accessories bag into the gaps left
by the removal of the transit bolts. The
transit bolts should be stored for future
Remove the transit bolts
before using the machine for the first time.
Faults occurring due to the machine being
operated with transit bolts fitted are out of
During the removal of the bolts, spacer
tubes fall inside the product. These can be
removed by tilting the product forward and
recovering them from the floor or inside
the base of the machine.
Adjusting the Feet /
Adjusting Adjustable Stays
Do not install your machine on a surface
ventilation at the base.
To ensure quiet and vibration-free
operation of your machine, install it on a
firm surface.
You can level your machine using the
(using the appliance
when the feet are not level can cause
the furniture door to knock when in use).
Loosen the plastic locking nut.
To increase the height of the machine,
turn the feet clockwise. To decrease
the height of the machine, turn the feet
anticlockwise.
Once the machine is level, tighten the
locking nuts by turning them clockwise.
Never insert cardboard, wood or other
similar materials under the machine to
level it.
When cleaning the ground on which
the machine is located, take care not to
disturb the level of the machine.
Electrical Connection
Your Washing Machine requires a 220-
mains supply.
1. Before operating the washing machine, remove the 4 transit bolts and rubber spacers from
the rear of the machine. If the bolts are not removed, they may cause heavy vibration, noise
and malfunction of the machine and void the warranty.
2. Loosen the transit bolts by turning them anticlockwise with an appropriate spanner.
3. Remove the transit bolts with a straight pull.
4. Fit the plastic blanking caps supplied in the accessories bag into the gaps left by the removal
of the transit bolts. The transit bolts should be stored for future use.
Bekijk gratis de handleiding van Caple WMI3100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Caple |
| Model | WMI3100 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 6400 MB |