Caple Di633 handleiding

52 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 41 van 52
Instruction manual DI633 41
Please keep this instruction manual for future reference
DISHWASHER INSTALLATION STEPS
1. Install the furniture door to the outer door of the dishwasher using the brackets provided. Refer
to the template for positioning of the brackets.
2. Adjust the tension of the door springs by using an Allen key turning in a clockwise motion to
tighten the left and right door springs. Failure to do this could cause damage to
your dishwasher.
3. Connect the inlet hose to the cold water supply.
4. Connect the drain hose. Refer to diagram.
5. Connect the power cord.
6. Afxthecondensationstripundertheworksurfaceofcabinet.Pleaseensurethecondensation
stripisushwithedgeofworksurface.
7. Place the dishwasher into position.
8. Level the dishwasher. The rear foot can be adjusted from the front of the dishwasher by turning
the Allen screw in the middle of the base of dishwasher use an Allen key. To adjust the front
feet,useaatscrewdriverandturnthefrontfeetuntilthedishwasherislevel.
9. The dishwasher must be secured in place. Fix the side with screws.
8
5

Bekijk gratis de handleiding van Caple Di633, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkCaple
ModelDi633
CategorieVaatwasser
TaalNederlands
Grootte4109 MB