Handleiding
Je bekijkt pagina 9 van 19
Instruction manual C8242C Instruction manual C8242C
16 17
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
U S ING THE EXTENDED ZONE FUNCTION
ACTIVATE THE EXTENDED ZONE
Adjust the heat setting between power levels 1 and 9
(for example, Zone 2).
The central section of the cooking zone will switch on.
the brackets cannot touch withthe inner surfaces of the worktop afterinstallation (see picture). This will
ensure the hob is properly secured to the underside of the work surface.
Zone 1
Zone 2
Press the Extended Zone control "◎”
The cooking zone indicator will show "=" and "6"
alternately.
This function is available on cooking zones 1 and 2.
An extended cooking zone has two cooking areas that can be used as central sections as well
as an outer section. The central section (A) can be used independently or with both section
(B) at once.
USING YOUR CERAMIC HOB
TO START COOKING
WHEN YOU HAVE FINISHED COOKING
When power to the hob is turned on the buzzer sounds
once, all the indicators light up for 1 second then go
out, indicating that the ceramic hob has entered standby
mode.
To turn on, touch the ON/OFF control . All the
indicators then show “-“.
Place a suitable pan on the cooking zone that you wish
to use.
Make sure both the bottom of the pan and the surface of
the cooking zone are clean and dry.
Select a heat setting by touching the “-“ or “+“controls.
- If you do not choose a heat setting within 1 minute, the
ceramic hob will automatically switch off. You will need
to start again at step 1.
- You can modify the heat setting at any time during
cooking.
Turn the cooking zone off by scrolling down to “- “or
touching “-“ and “+“ together.
You can turn the whole hob off by touching the
ON/OFF control.
Under any circumstances, the brackets cannot touch with the inner surfaces of the worktop after installation (see picture). This will
ensure the hob is properly secured to the underside of the work surface.
BEWARE OF HOT SURFACES
“ ” will show which cooking zone is hot to touch. It will
disappear when the surface has cooled down to a safe
temperature. It can also be used as an energy saving
function. If you want to heat further pans, use the zone
that is still hot.
Bekijk gratis de handleiding van Caple C8242C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Caple |
| Model | C8242C |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 1484 MB |
