Handleiding
Je bekijkt pagina 15 van 19
Instruction manual C8242C Instruction manual C8242C
28 29
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
CONNECTING THE HOB TO THE MAINS POWER SUPPLY
WARNING:
The power supply should be connected in compliance with the relevant standard,or a single-pole
circuit breaker. The method of connection is shown below.
› The fuse rating for this appliance is 25amp.
› If the cable is damaged or needs replacing, this should be done by an after-sales technician
using the correct tools.
› If the appliance is being connected directly to the mains supply, an omnipolar circuit breaker
must be installed with a minimum gap of 3mm between the contacts.
› The installer must ensure that the correct electrical connection has been made and that it
complies with safety regulations.
› The cable must not be bent or compressed.
› The cable must be checked regularly and replaced by authorised technicians only.
Under any circumstances, the brackets cannot touch with the inner surfaces of the worktop after installation (see picture). This will
ensure the hob is properly secured to the underside of the work surface.
The bottom surface and the power cord of the hob are not accessible after installation.
the brackets cannot touch with the inner surfaces of the worktop after installation (see picture). This will
ensure the hob is properly secured to the underside of the work surface.
ADJUSTING THE BRACKET POSITION
Fix the hob to the work surface by screwing 4 brackets on the bottom of hob [see picture] after
installation. Adjust the bracket position to suit different worktop thickness’s.
oonn
HOB
WORK SURFACE
A
HOB
WORK SURFACE
B
BRACKET
BRACKET
Under any circumstances, the brackets cannot touch with the inner surfaces of the worktop after installation (see picture). This will
ensure the hob is properly secured to the underside of the work surface.
Under any circumstances, the brackets cannot touch with the inner surfaces of the worktop
after installation [see picture]. This will ensure the hob is properly secured to the underside of the
work surface.
CAUTIONS:
› The ceramic hob should not be mounted next to cooling equipment, dishwashers
and rotary dryers.
› The wall and cooking zone above the work surface must withstand heat.
› To avoid any damage, the worktop sandwich layer and adhesive must be heat resistant.
BEFORE LOCATING THE FIXING BRACKETS
› The unit should be placed on a stable, smooth surface [use the packaging].
Do not apply force onto any controls protruding from the hob.
screw
A
bracket
B
screw hole
C
base
D
A
B
C
D
Bekijk gratis de handleiding van Caple C8242C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Caple |
| Model | C8242C |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 1484 MB |
