Handleiding
Je bekijkt pagina 13 van 28
ORIFICE CHANGE - GAS OVENS (MANUAL CLEAN)
GAS OVEN BURNERS (MCOR / MCR models)
These models are equipped with an L-shaped tubular bake burner located under the oor of the oven cavity, and a stainless-steel mesh infrared broiler
located in the ceiling of the oven cavity. For 48” models, there is only a tubular bake burner, no broiler.
2 SCREWS
AT REAR
OVEN
BOTTOM
LINER
LADDER
RACKS
Fig. 1
BAKE BURNER ORIFICE
1. Remove 4 screws holding the kick plate below the oven door and set aside.
2. Open the door and remove all the racks. Remove one of the side ladder racks.
3. Remove 2 screws at the rear of the oven holding down the oven bottom liner. Insert
a thin-bladed at screwdriver at the front edge of the liner and pry up carefully.
Remove this liner and set aside. (Fig. 1)
4. Remove 4 screws holding the ame spreader in place and set aside. (Fig. 2)
5. The burner is now visible. You do not have to remove the burner, but it will be
necessary to view the ame in a later step. (Fig. 3)
4 SCREWS
FLAME
SPREADER
Fig. 2
BURNER
Fig. 3
IGNITER
© 2025 Capital Cooking
11
EN
Bekijk gratis de handleiding van Capital CGRT362B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Capital |
| Model | CGRT362B2 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5590 MB |
