Handleiding
Je bekijkt pagina 9 van 20
9
4 Operation
4 Operation
4-1. Zoom operation
4-1-1. Manual Zoom Operation
1
Set the zoom operation change-over knob at the bottom of
the lens drive unit to “ MANU.” position.
2
Turn the zoom ring (itself or with the zoom lever).
As viewed from the camera side
C.W. ：to zoom out (to widest angle)
C.C.W. ：to zoom in (to telephoto)
NOTE
The zoom operation change-over knob must be set
to the “MANU.” position before performing manual
zoom operations.
The lens may be damaged if manual zoom
operations are forcibly performed with the knob at
the “SERVO” position.
ZOOM
SERVO
MANU.
Zoom Operation Change-over Knob
1.7
7
M
F
Wide
Tele
Zoom Ring
Zoom Lever
1
Set the zoom operation change-over knob at the bottom of
the lens drive unit to “SERVO” position.
2
The zoom can be operated by pressing the zoom rocker
seesaw located on the top of the lens drive unit.
Operation direction
Zoom direction
Zoom out
(To widest angle)
Zoom in
(to telephoto)
T W
T
W
The zoom speed changes according to how far down the
rocker seesaw is pressed.
4-1-2. Servo Zoom Operation
The built-in motor in the drive unit can also be used to zoom.
ZOOM
SERVO
MANU.
Zoom Operation Change-over Knob
IRIS
RET
A M
• •
T
W
Zoom Rocker Seesaw
NOTE
If slow speed operation is unstable in servo zoom
operation
*1
, perform the operation of zooming in and
out about 10 to 100 times. At this time, press the
zoom rocker seesaw to the maximum position.
*1 Slow speed operation may become unstable if servo zoom
operation has not been performed for a long period of time.
Bekijk gratis de handleiding van Canon KJ20x8.2B KRSD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | KJ20x8.2B KRSD |
| Categorie | Lens |
| Taal | Nederlands |
| Grootte | 2750 MB |
