Handleiding
Je bekijkt pagina 94 van 799
Specify whether to display the authentication screen for entering the user name and password when
searching.
● To display the authentication screen, select this checkbox.
● To use the user name and password set here for authentication, clear this checkbox.
[Use Same Authentication Information as When Send Operation Started]
Set whether to use the authentication information for searching if authenticated when using the fax or scan
function.
This checkbox is selected when the [Display Authentication Screen When Searching] checkbox is selected.
[User Name]
Use single-byte alphanumeric characters and symbols to enter the user name of the machine that is
registered to the LDAP server.
● When [Use] is selected for [Login Information], enter the user name in the form "(Windows domain name)\
(Windows user name)."
Input example:
example\user1
● When [Use (Security Authentication)] is selected for [Login Information], enter the Windows user name.
Input example:
user1
[Set/Change Password]
To set a password, select the checkbox, and enter the password using single-byte alphanumeric characters
and symbols.
[Domain Name]
When [Use (Security Authentication)] is selected for [Login Information], enter the directory tree name in
Active Directory using single-byte alphanumeric characters.
Input example:
example.com
LDAP Server for Authentication
[Login Information]
Select whether to use Administrator ID or data obtained with the Kerberos protocol for authentication
implemented by the LDAP server.
● To use Administrator ID, select [Use].
● To use data obtained with the Kerberos protocol for the authentication password, select [Use (Security
Authentication)]. The clock of the machine must be synchronized with that of the LDAP server.
● If you specied an IP address for [Server Address] in step 5, select as follows according to the support
status of your DNS server:
● If the DNS server supports only forward lookup, select [Use].
● If you selected [Use (Security Authentication)], make sure that the DNS server supports reverse lookup.
[Use Administrator ID]
When [Use] is selected for [Login Information], select whether to use the Administrator ID for authentication.
To use the Administrator ID, select the checkbox and set the user name and password. If you clear the
checkbox, logins are anonymous (no user name).
[User Name]
Use single-byte alphanumeric characters and symbols to enter the user name of the machine that is
registered to the LDAP server in the form "(Windows domain name)\(Windows user name)."
Input example:
example\user1
[Set/Change Password]
Setting Up
84
Bekijk gratis de handleiding van Canon imageCLASS MF753Cdw II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | imageCLASS MF753Cdw II |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 75649 MB |
