Handleiding
Je bekijkt pagina 93 van 799
DC=john,DC=example,DC=com
● If left blank, the machine automatically starts search from an arbitrary position.
[Use TLS]
Select this checkbox to encrypt communication with the LDAP server using TLS.
● For an LDAP server for search, this is enabled only when [Use] or [Use (Security Authentication)] is selected
in [Login Information] in 8 below.
● For an LDAP server for authentication, this is enabled only when [Use] is selected in [Login Information] in
8 below.
[Port Number]
Enter the port number used to communicate with the LDAP server.
7
Set the time until timeout and attributes, as needed.
LDAP Server for Search
[Search Timeout]
Enter the time from search start to timeout in seconds.
LDAP Server for Authentication
[Authentication/Attribute Acquisition Timeout]
Enter the time from start of authentication and attribute acquisition to timeout in seconds.
[User Name Attribute]
Enter the attribute name to be compared with a user name entered during authentication using single-byte
alphanumeric characters.
Input example:
sAMAccountName
* This is not required if [Use (Security Authentication)] is selected in [Login Information] in Step 8.
[Email Address Attribute]
Enter the attribute name to be used for obtaining an e-mail address from the authentication server, using
single-byte alphanumeric characters.
Input example:
mail
8
Congure the login information of the LDAP server.
LDAP Server for Search
[Login Information]
Specify whether to use the login Information for LDAP server authentication.
● When [Use] or [Use (Security Authentication)] is selected, set a user name and password.
● To use data obtained with the Kerberos protocol for the authentication password, select [Use (Security
Authentication)]. The clock of the machine must be synchronized with that of the LDAP server.
● If you specied an IP address for [Server Address] in 5, select as follows according to the support status of
your DNS server:
● If the DNS server supports only forward lookup, select [Do Not Use] or [Use].
● If you select [Use (Security Authentication)], make sure that the DNS server supports reverse lookup.
[Display Authentication Screen When Searching]
Setting Up
83
Bekijk gratis de handleiding van Canon imageCLASS MF753Cdw II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | imageCLASS MF753Cdw II |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 75649 MB |
