Handleiding
Je bekijkt pagina 251 van 795
Conguring Detailed Information of the E-mail Server
(Remote UI)
C0J0-054
Use Remote UI from a computer to congure the information of the e-mail server to use for sending scanned data by
e-mail and for sending and receiving scanned data by I-Fax. You can also congure POP authentication before
sending, SMTP authentication, and encryption communication settings.
Administrator privileges are required. The machine must be restarted to apply the settings.
If the SMTP port number of the e-mail server is other than 25 and/or the POP3 port number is other than 110, you
must change the port number setting.
Changing the Port Number(P. 385)
Required Preparations
● Connect the computer you are using to congure the settings to the machine over a network.
● Prepare the following information and keep it close by.
- IP address of the machine Checking the Network Status and Settings(P. 92)
- E-mail address of the machine
- Setting information of the e-mail server (SMTP/POP3 server name, authentication setting, user name and
password to be used for authentication, encrypted communication setting)
* For details about the setting information, contact your provider or network administrator. Depending on
the usage environment, you can also refer to the information set in the computer e-mail software.
1
Log in to Remote UI in Administrator Mode. Starting Remote UI(P. 446)
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of
Remote UI(P. 449)
3
Click [TX Settings] [Email/I-Fax Settings] [Edit].
➠
The [Edit Email/I-Fax Settings] screen is displayed.
4
Enter the basic settings of the e-mail server.
[SMTP Server]
Enter the SMTP server name (the host name or IP address) to be used for sending e-mail and I-Fax, using
single-byte alphanumeric characters.
Input example: Host name
smtp.example.com
[Email Address]
Enter the e-mail address of the machine using single-byte alphanumeric characters.
[POP Server]
When receiving I-Faxes or when using POP authentication before sending (POP before SMTP), enter the POP3
server name (the host name or IP address) using single-byte alphanumeric characters.
Input example: Host name
pop.example.com
Scanning
241
Bekijk gratis de handleiding van Canon imageCLASS MF662Cdw, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | imageCLASS MF662Cdw |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 74959 MB |
