Handleiding
Je bekijkt pagina 86 van 710
Setting IPv4 Addresses
A19R-01K
The machine'
s IPv4 address can either be assigned automatically using DHCP or entered manually.
By default, the IPv4 address is set automatically when connected to a wired or wireless LAN, but you can set it or
change it manually according to your usage environment and purpose.
This section describes how to congure the settings using the control panel.
You can also set the IPv4 address using Remote UI from a computer after it has been set on the machine.
Managing
the Machine from a Computer (Remote UI)(P
. 394)
Administrator privileges are required. The machine must be restarted to apply the settings.
Touch Panel Model(P. 77)
5 Lines LCD Model(P. 78)
Touch Panel Model
1
On the control panel, press [Menu] in the [Home] screen.
[Home] Screen(P. 121)
2
Press [Preferences] [Network] [TCP/IP Settings] [IPv4 Settings] [IP Address
Settings].
If the login screen appears, enter the System Manager ID and PIN, and then press [Log In]. Logging In to
the Machine(P
. 138)
3
Set the IP address.
When Manually Setting the IP Address
1
Press [Auto Acquire].
➠ The [Auto Acquir
e] scr
een is displayed.
2
Set [Select Protocol] to [Off].
3
Set [Auto IP] to [Off].
4
Press [Apply].
➠ The [IP Addr
ess Settings] screen is displayed.
5
Press [Manually Acquire].
➠ The IP addr
ess input screen is displayed.
6
Enter the IP address, and press [Apply].
7
Enter the subnet mask, and press [Apply].
Setting Up
77
Bekijk gratis de handleiding van Canon imageCLASS MF289dw, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | imageCLASS MF289dw |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 70127 MB |
