Canon imageCLASS LBP674Cdw II Handleiding (548 Pagina's)

Handleiding

/ 548

Je bekijkt pagina 70 van 548

[Select Protocol]

Normally, set to [DHCP]. However, when [DHCP] is set in an environment where DHCP cannot be used,

the machine will continue to conrm Auto Acquire in the network, creating unnecessary communication.

When not using DHCP, set this to [Off].

[Auto IP]

Normally, set to [On]. Although priority is given to the IP address allocated with DHCP, if there is no

response from DHCP, Auto IP will be used.

4

Press [Apply].

4

Press [OK].

5

Restart the machine. Restarting the Machine(P. 90)

➠ The settings are applied.

Perform a connection test to check whether the IPv4 address is correctly congured. Checking the

Network Status and Settings(P. 79)

Checking the Currently Set IP Address

● On the screen in Step 3, press [Check Settings] to check the current IP address setting. If the IP address is

displayed as "0.0.0.0," it is not correctly congured.

If the IP Address Is Changed after Installing the Printer Driver

● In Windows, you must add a new port.

Conguring a Printer Port (Windows)(P. 151)

If you do not know which port is being used, see the following:

Viewing the Printer Port(P. 523)

● In macOS, you must re-register the machine on the Mac. For details about registering the machine, see the

manual of the driver at the online manual site.

https://oip.manual.canon/

* If you are using DHCP to automatically obtain the IP address of the machine, the IP address may be changed

automatically.

Setting Up

62

/ 548

Bekijk gratis de handleiding van Canon imageCLASS LBP674Cdw II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.