Canon imageCLASS LBP674Cdw II Handleiding (548 Pagina's)

Handleiding

/ 548

Je bekijkt pagina 69 van 548

Setting IPv4 Addresses

AU3J-01E

The machine's IPv4 address can either be assigned automatically using DHCP or entered manually.

By default, the IPv4 address is set automatically when connected to a wired or wireless LAN, but you can set it or

change it manually according to your usage environment and purpose.

This section describes how to congure the settings using the control panel.

You can also set the IPv4 address using Remote UI from a computer after it has been set on the machine. Managing

the Machine from a Computer (Remote UI)(P. 278)

Administrator privileges are required. The machine must be restarted to apply the settings.

1

On the control panel, press [Menu] in the [Home] screen. [Home] Screen(P. 98)

2

Press [Preferences] [Network] [TCP/IP Settings] [IPv4 Settings] [IP Address

Settings].

If the login screen appears, enter the Administrator ID and PIN, and then press [Log In]. Administrator ID

and PIN(P. 10)

3

Set the IP address.

When Manually Setting the IP Address

1

Press [Auto Acquire].

➠ The [IP Address Settings (Auto Acquire)] screen is displayed.

2

Set [Auto Acquire] to [Off], and press [Apply] [OK].

➠ The [IP Address Settings] screen is displayed.

3

Press [Manually Acquire].

➠ The IP address input screen is displayed.

4

Enter the IP address, subnet mask, and gateway address, and press [Apply].

When Assigning an IP Address Automatically

1

Press [Auto Acquire].

➠ The [IP Address Settings (Auto Acquire)] screen is displayed.

2

Set [Auto Acquire] to [On].

3

Congure the Auto Acquire setting, as needed.

Setting Up

61

/ 548

Bekijk gratis de handleiding van Canon imageCLASS LBP674Cdw II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.