Handleiding
Je bekijkt pagina 241 van 542
➠ The [Edit Settings for Certicate Issuance Auto Request] screen is displayed.
5
Select the [Enable Timer for Certicate Issuance Auto Request] checkbox, and enter
the start date and time to request issuance of a certicate.
6
Set other items at the time of issuance auto request, as needed.
[Auto Adjust Issuance Request Time]
To adjust the certicate issuance request time, select this checkbox.
The start time for issuing a certicate may be adjusted randomly by up to 10 minutes to reduce the load on
the SCEP server.
[Perform Polling When Communication Error Occurs or When Issuance Request Is Deferred]
Check the status of the SCEP server, such as when certicate issuance has been deferred. Select the checkbox
and enter the number of polling retries and interval.
* Polling is not performed and an error occurs in the following cases:
● When the machine has exceeded the limit of keys and certicates that can be registered
● When an error occurs in the obtained response data
● When an error occurs in the SCEP server
[Send Periodic Issuance Requests]
The request for certicate issuance occurs automatically and regularly. Select the checkbox and select the
issuance request interval from the pulldown menu.
Enabling this setting resets the start date and time to request issuance of a certicate.
[Automatically Restart Device After Acquiring Certicate]
To restart the machine after obtaining a certicate, select the checkbox.
[Delete Old Key and Certicate]
To overwrite the key and certicate with the same location where the key will be used, select the checkbox.
7
In [Settings for Key and Certicate To Be Issued], set the items for a key and
certicate.
[Key Name]
Enter the key name using single-byte alphanumeric characters.
[Signature Algorithm]
Select the signature algorithm from the pulldown menu.
[Key Length (bit)]
Select the key length from the pulldown menu. The larger the value, the better the security, but this slows
down communication processing.
[Organization]
Enter the organization name using single-byte alphanumeric characters, as needed.
[Common Name]
Enter the name of the certicate subject using single-byte alphanumeric characters.
This is also called the Common Name (CN).
[Challenge Password]
When the SCEP server has a password, enter the password for the request data used for the issuance request
using single-byte alphanumeric characters.
[Key Usage]
Security
233
Bekijk gratis de handleiding van Canon imageCLASS LBP646Cdw, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | imageCLASS LBP646Cdw |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 49330 MB |
