Camry CR 7075 handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248/ 248

Afdrukken

Je bekijkt pagina 9 van 248

9

15. Stainless steel mesh filter

16. EPA filter

Components - look at figures 4 and 5

A. Battery module release button

B. LED touch screen

C. Power button

D. Motor housing release button

E. Aluminum tube release button

F. Dust container release button

G. Wall bracket release button

H. Charging port in motor housing

J. Charging port in wall bracket

Buttons and charging ports - look at figures 3A, 3B and 4 LED touch screen (B) icon description - see Figure 6A-G.

B.I. Brush icon - the icon lights up continuously during normal brush operation and flashes when the floor brush or

mop brush is blocked.

B.II. Airflow icon - the icon lights continuously during normal operation of the unit and flashes when airflow is

blocked. When it flashes, turn off the unit and remove dust from the dust container (14).

B.III. Battery charging icon - this icon lights up continuously during normal charging process. When it blinks,

something is wrong with the charging process, check the power supply (5).

B.IV. Battery icon - this icon lights up continuously during normal operation. The icon consists of 4 components.

When the battery is fully charged, 4 stable elements are visible, when the battery is close to depletion, only one

element is visible, when the battery is completely discharged, the LED touch screen (B) goes out. During charging, the

icon shows an increasing number of elements, when the battery is fully charged, all 4 elements are visible.

B.V. White fan icon - the bar under the icon shows low, medium or high suction power.

B.VI. AUTO icon - when pressed on the touch panel, it flashes because AUTO mode has been activated, the current

suction power depends on the current amount of dust and dirt detected by the dust sensor, the activation of AUTO

mode is indicated by the color of the ring on the LED screen:

- low suction power - blue light ring around the LED screen

- medium suction power - red light ring around the LED screen

- high suction power - purple light ring around LED screen

Press AUTO mode on the screen again, it will stop flashing, AUTO mode will be turned off.

BEFORE FIRST USE

The device will reach you when the battery is about 50% charged. When the battery is fully used up, the LED touch

screen (B) will go off. Charge the device to its maximum level for 4.5-5 hours. For details, see: charging the device.

Before using the device, first remove large sharp objects from the floor, as they may damage the device.

Do not draw flammable substances or any liquids like gasoline or cigarettes into the device.

INSTALLATION

1. Remove all packaging materials before beginning assembly. Follow the instructions below to assemble the exact

accessories:

2. Installing the aluminum tube (4)

Attach one end of the aluminum tube (4) to the motor housing (1), fitting both electro connectors in place, and push in

until you hear a click, indicating that the release button (D) has been properly locked in place.

3. Installing the floor brush (2) or electric mop brush (3)

Attach the floor brush (2) to the other end of the aluminum tube (4) by releasing the button (E) on the aluminum tube

(4) in the same way as described in step 2 above. The method of mounting the electric mop brush (3) is the same.

4. Installation of the crevice nozzle (7) or 2-in-1 upholstery brush (6)

Attach the crevice nozzle (7) to the motor housing (4) and push it in until you hear a click, which means that the

release button (D) has been properly locked. The crevice brush can be used to clean crevices in couches, bookshelves,

etc. The same installation method applies to the upholstery brush (6).

5. Installation of the wall bracket (8) - look at Figure 2

Choose a suitable place for mounting the wall bracket (8). Holding the wall bracket (8) in the mounting position, mark

four mounting holes on the wall with a pencil. Then, according to the marks made, drill two holes in the upper part and

two holes in the lower part with an electric drill. Then, using a hammer, insert the plastic dowels and screws into the

holes.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248/ 248

Bekijk gratis de handleiding van Camry CR 7075, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Stofzuiger