Cambium Networks cnReach N500 Handleiding (253 Pagina's)

Handleiding

/ 253

Je bekijkt pagina 80 van 253

cnReach N500 User Guide System Configuration

phn-4980_001v004 August 2019)

2-47

To create a new Modbus TCP to RTU bridge connection:

1. In the UI, go to Serial > Modbus Bridging.

2. Click Add to display the bridging settings.

3. Click the Mode list and select TCP Server or TCP Client for each part of the bridge connection. Typically,

the TCP Bridge Connection is in TCP Server mode and the RTU Bridge Connection is in TCP Client mode. The

Host Address field is enabled for TCP Clients only.

4. In Port#, enter the port number for the bridge. This is the port through which the bridge communicates.

5. For the TCP Client, enter the host IP address in Host Address. (You can automatically select the local host by

clicking localhost.)

6. Click Commit to save the changes.

The following diagram shows configuration of a Modbus TCP/Modbus RTU service and their related

logical components.

/ 253

Bekijk gratis de handleiding van Cambium Networks cnReach N500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.