Cambium Networks cnReach N500 handleiding
Handleiding
Je bekijkt pagina 79 van 253
cnReach N500 User Guide System Configuration
phn-4980_001v004 August 2019)
2-46
On the serial service configuration page, create a serial client service, with the remote listening port
point to the one set in the radio network configuration, use 127.0.0.1 as remote IP address
Serial/Modbus Bridging
The Modbus Bridging menu is used for setting up a protocol gateway between Modbus TCP (from the
IP side) to Modbus RTU (at the serial side)
Modbus TCP and RTU bridging allow the cnReach radio to act as a protocol converter so that a TCP
polling host (such as a SCADA master) can communicate with a device running an RTU terminal server
(typically an RTU device often behind a repeater). The feature helps establish the TCP session on
devices on both sides of the radio.
The following figure shows how this conversion is implemented by cnReach:
Bekijk gratis de handleiding van Cambium Networks cnReach N500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cambium Networks |
| Model | cnReach N500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 43613 MB |
