Cambium Networks cnReach N500 Handleiding (253 Pagina's)

Handleiding

/ 253

Je bekijkt pagina 65 van 253

cnReach N500 User Guide System Configuration

phn-4980_001v004 August 2019)

2-32

Dynamic Payload

Dynamic payload is used to optimize the usage of the air interface. When there is no data to be sent in

the uplink direction the AP can use the extra time to send more data in the downlink period. Refer to

the technical reference section of this user guide for more information.

Protocol

cnReach radios can be configured to deliver Ethernet traffic only, a mixture of Ethernet and Serial data

or only Serial data.

If you are planning to use Ethernet traffic (including over-the-air management traffic) at all this

setting should be left as Ethernet.

The other modes are used when the goal is to send ONLY serial traffic. In serial only modes:

• No Ethernet traffic will be passed.

• User will be able to manage the radio only via the local Ethernet port

• This allows serial traffic to be sent over the radio link without TCP/IP overhead

• Serial data jitter is reduced significantly due to elimination of packetization and buffering

Raw modes send data as packets arrive. Seamless serial modes allow the radio to join a seamless

serial group within an overall network that is sharing Ethernet and Serial-only radios. Message modes

refer to the radio waiting for a pause in the traffic before sending the data.

Diag Threshold

This feature should only be used when contacting Cambium support. It is not typically used other than

for detailed troubleshooting.

/ 253

Bekijk gratis de handleiding van Cambium Networks cnReach N500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.