Cambium Networks cnReach N500 Handleiding (253 Pagina's)

Handleiding

/ 253

Je bekijkt pagina 42 van 253

cnReach N500 User Guide System Configuration

phn-4980_001v004 August 2019)

2-9

Routed

In this example the web interface can be accessed via the IP address of the connected interface. Routed

interfaces can be assigned unique IP addresses and are required to be on different subnets (one or

multiple IP addresses can be assigned to the same routed interface. Static routes must be configured

both in the radio and any connected Host for Ethernet traffic to be passed between subnets. A Routed

interface will block Broadcast traffic and only pass addressed traffic routed across that interface.

Description

The Description can be renamed alphanumerically up to a 30-character maximum. VLAN descriptions

may also be edited on the Network/VLANs page.

IPv4

IPV4 address used to communicate with or connect to the radio. The address specified is used to

access the Web Interface and establish communications with serial devices through the radio’s built-in

terminal server capabilities.

IP Mask

Mask applied to the IPV4 address to identify the network segment containing the Radio and when

forwarding traffic to the default gateway is required.

MAC Address

Enclosed Radio; Ethernet ports list the Ethernet carrier board MAC. Radio1 and VLAN1 list the RF1

Module MAC unless Eth1 or Eth2 are set to Routed, then VLAN1 will list the Ethernet carrier board MAC.

Radio2 lists the RF2 Module MAC.

PVID

Primary VLAN ID; default setting is 1 for VLAN1 (Management VLAN). Additional VLANs can also be set

as the PVID for any interface.

/ 253

Bekijk gratis de handleiding van Cambium Networks cnReach N500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.