Cambium Networks cnMatrix TX2020R-P Handleiding (237 Pagina's)

Handleiding

/ 237

Je bekijkt pagina 22 van 237

page 15 of 230

Type the switchport mode trunk command into the terminal to select the trunk port mode.

Press the

key.

Type the exit commandinto the terminal to go back to the global configuration mode. Press the

key.

Type the vlan 10 command into the terminal to enter the configuation vlan mode, and to select

the VLAN to be configured. Press the

key.

Type the ports add gigabitethernet 0/5 command into the terminal to configure the port list

for VLAN 10.

Type the end command into the terminal to go back to the Privileged EXEC mode. Press the

key.

Type the show vlan port gigabitethernet 0/5 command into the terminal to display infor-

mation about the configured interface. Press the

key.

For more information, see VLAN Parameters and Commands

.

2.1.5 Troubleshooting VLAN

Useful commands for troubleshooting:

■ To check the VLAN created in ports' membership:

cnMatrix# show vlan brief

■ To check the operation mode of each interface:

/ 237

Bekijk gratis de handleiding van Cambium Networks cnMatrix TX2020R-P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.