Cambium Networks cnMatrix TX2020R-P Handleiding (237 Pagina's)

Handleiding

/ 237

Je bekijkt pagina 15 van 237

page 8 of 230

■ The Configuration Restore feature handles the restoration of settings found within the con-

figuration file at system start-up. To enable this feature, make sure that a local configuration

file exists or a configuration download is issued.

■ The Configuration Download feature retrieves a configuration file from an external source

(TFTP server or SFTP server), and these are effective after a system restart.

■ The Configuration Erase feature offers the capability to use the switch with its factory de-

faults settings.

The configuration restore feature can be used only if a configuration file is present when

restarting the switch.

The save / restore / download / erase features are available in CLI,SNMP and WEB inter-

faces.

 The Configuration Save feature has the Autosave option, so that the local configuration

can be saved auttomaticaly everytime a change in the settings is performed. The

Au-

tosave option needs incremental save because of its triggering mechanism which deter-

mines when a configuration change occurred.

Default Values

■ Autosave is disabled by default

■ The incremental-save option is disabled by default.

■ The auto-save trigger option is disabled by default.

■ The startup configuration restore option is set to norestore by default.

Scaling Numbers

■ The configurations features either work locally on the box or interact with a third party serv-

er. In the second scenario, the scaling capability is dependent on the server.

For more information, see

Save/Restore/Erase/Download Configurations - Parameters and Com-

mands in CLI .

1.5 Boot Partial Default

1.5.1 Boot Partial Default

The boot partial default feature enables you to delete all configuration, except for:

■ User configuration for IP address on VLAN 1.

■ Default and Static routes.

■ Device agent status.

■ cnMaestro URL.

■ User configuration for username and password to login cnMatrix switch.

■ User configuration for DNS servers.

To reset the switch to partial configuration, run the following command:

boot partial default

/ 237

Bekijk gratis de handleiding van Cambium Networks cnMatrix TX2020R-P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.