Cambium Networks cnMatrix EX2028 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 285 van 320

Security Features 285

1. Type the configure terminal command into the terminal. Press the Enter key.

2. Type the interface gigabitethernet 0/1 command into the terminal to select the interface to be

configured. Press the Enter key.

3. Type the switchport port-security maximum 5 command into the terminal to set the maximum

number of MAC addresses allowed. Press the Enter key.

4. Type the switchport port-security violation protect command into the terminal to set the action in

case of violation occurs. Press the Enter key.

5. Type the switchport port-security command into the terminal to enable the feature on that port

(interface). Press the Enter key.

Note

If the feature is enabled on port without setting the maximum number of MACs

or the action, the default maximum is set to 1 and the action is set to protect.

Example: cnMatrix(config-if)# switchport port-security

How to disable Port MAC Limit - Port Based in CLI Interface

(Example)

1. Type the configure terminal command into the terminal. Press the Enter key.

2. Type the interface gigabitethernet 0/1 command into the terminal to select the interface to be

configured. Press the Enter key.

3. Type the no switchport port-security command into the terminal to disable the feature on that

port(interface). Press the Enter key.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.