Cambium Networks cnMatrix EX2028 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 265 van 320

Security Features 265

6. Type the mac access-list extended 2 command into the terminal to create MAC access list. Press

the Enterkey.

7. Type the permit any any 0x800 priority 1 command into the terminal to specify the packets to be

forwarded based on MAC address and associated parameters. Press the Enterkey.

8. Type the exit command into the terminal to go back to the configuration mode. Press the

Enterkey.

9. Type the interface gigabitethernet 0/5 command into the terminal to select an interface to be

configured. Press the Enterkey.

10. Type the mac access-group 1 in command into the terminal to enable ACLone for inbound traffic

on port. Press the Enterkey.

11. Type the mac access-group 2 in command into the terminal to enable access control list2 for

inbound traffic on port. Press the Enterkey.

12. Type the exit command into the terminal to go back to the configuration mode. Press the

Enterkey.

13. Type the access-list commit command into the terminal. Press the Enterkey.

Note

This command is applicable onlywhen the provision mode is consolidated.

14. Type the end into the terminal to go to thePrivileged EXEC mode. Press the Enterkey.

15. Type the show access-lists command into the terminal to display IP access lists. Press the

Enterkey.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.