Cambium Networks cnMatrix EX2028 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 264 van 320

Security Features 264

4. Type the exit command into the terminal to go back to the configuration mode. Press the Enter

key.

5. Type the vlan 2 command into the terminal to select the interface to be configured and to go to

the interface configuration mode. Press the Enter key.

6. Type the ip access-group 1001 in command into the terminal to enable access control for packets

on the interface. Press the Enter key.

7. Type the end command into the terminal to go to the Privileged EXEC mode. Press the Enter key.

8. Type the show access-list ip 1001 command into the terminal to display the IP access lists. Press

the Enter key.

Configuring ACL in CLI Interface- Consolidated Mode

1. Type the config terminal command into the terminal. Press the Enterkey.

2. Type the access-list provision mode consolidated command into the terminal to configure access-

list provision mode as consolidated. Press theEnterkey.

3. Type the mac access-list extended 1 command into the terminal to create MAC access list. Press

the Enterkey.

4. Type the deny any any priority 2 command into the field to specify the packets to be rejected

based on MAC address and the associated parameters. Press the Enterkey.

5. Type the exit command into the terminal to go back to theconfiguration mode. Press the Enter

key.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.