Cambium Networks cnMatrix EX2028 handleiding
Handleiding
Je bekijkt pagina 262 van 320
Security Features 262
1. Type the config terminal command into the terminal. Press the Enter key.
2. Type the ip access-list extended 1001 command into the terminal to create an IP access list. Press
the Enter key.
3. Type the deny icmp any any message-type 0 message-code 8 command into the terminal to
specify the ICMP packets to be rejected based on IP address and associated parameters. Press the
Enter key.
4. Type the exit command into the terminal to go back to the configuration mode. Press the Enter
key.
5. Type the interface gigabitethernet 0/5 command into the terminal to select the interface to be
configured and to go to the interface configuration mode. Press the Enter key.
6. Type the ip access-group 1001 in command into the terminal to enable access control for packets
on the interface. Press the Enter key.
7. Type the end command into the terminal to go to the Privileged EXEC mode. Press the Enter key.
8. Type the show access-list command into the terminal to display the IP access lists. Press the Enter
key.
Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cambium Networks |
| Model | cnMatrix EX2028 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 32421 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Gewicht | 2770 g |
| Breedte | 440 mm |
| Diepte | 209 mm |
| Hoogte | 44 mm |
