Cambium Networks cnMatrix EX2028 handleiding
Handleiding
Je bekijkt pagina 261 van 320
Security Features 261
l
The maximum number of ACLs that can be configured on a system is limited by the number of
hardware policies available.: One ACL takes up one hardware policy for each port on which is
applied. There is a total of 145 IPv4 policies available, while MAC and IPv6 ACLs share a total of 145
policies. One ACL applied on all ports takes up a single hardware policy.
l
The usage of hardware policies can be displayed at any moment by issuing the show access-lists
resources command.
Limitations
l
IPV6 access list only work when they are applied to the ingress of a port.
l
If it is necessary to configure multiple ACL types on the same port, note that their priorities will not
be respected in this case. Priorities only assign higher or lower precedence of rules of the same
type.
l
On egress*, only one type of ACLs is supported at one time: either IP or MAC ACLs. This type can
be set globally via the egress access-list mode command.
Default Values
l
The default provisioning mode: immediate.
l
No ACLs are preconfigured on the switch.
l
Default egress access-list mode: IP.
Configuring ACL in CLI Interface - Immediate Mode
Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cambium Networks |
| Model | cnMatrix EX2028 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 32421 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Gewicht | 2770 g |
| Breedte | 440 mm |
| Diepte | 209 mm |
| Hoogte | 44 mm |
