Cambium Networks cnMatrix EX2028 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 231 van 320

Management Features 231

4. Type the write startup-config command into theterminal to save the switch configuration into a

switch local file. Press the Enter key.

5. Type the copy startup-config usb:switch1.conf command into the terminal to copy the saved

configuration file to USB. Press the Enter key.

6. Type the show usb files command into the terminal to display the files that are currently on the

USB.

For more information, see USB Parameters and Commands.

How to Copy Startup Config from USB to Switch (Example)

1. Type the show usb files command into the terminal to display the files that are currently on the

USB. Press the Enterkey.

2. Type the configure terminal command into the terminal. Press the Enterkey.

3. Type the mount usb command into the terminal to mount a USB stick. Press the Enterkey.

4. Type the exit command into the terminal to go to the Privileged EXEC mode. Press the Enterkey.

5. Type the copy usb:switch1.conf startup-config command into the terminal to copy an existing

configurationfile from the USB to your cnMatrix switch.

Caution

Please reboot your switch to activate the new configuration.

For more information, see USB Parameters and Commands.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.