Cambium Networks cnMatrix EX2028 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 189 van 320

L3 Features 189

1. Type the configure terminal command into theterminal. Press the Enterkey.

2. Type the interface gigabitethernet 0/9 command into theterminal to select the interface to be

configured on switch B. Press the Enterkey.

3. Type the shutdown command into the terminal. Press the Enterkey.

4. Type the no switchport command into theterminal. Press the Enterkey.

5. Type the ip address 192.168.1.2 255.255.255.0 command into theterminal. Press the Enterkey.

6. Type the no shutdown command into the terminal. Press the Enter key.

7. Type the exit command into theterminal to go back to the configuration mode. Press the

Enterkey.

8. Type the router ospf command into the field to enable the OSPF routing process and to enter the

configuration router mode on switch B. Press the Enter key.

9. Type the network 192.168.1.2 255.255.255.0 area 0.0.0.0 command into theterminal. Press the

Enterkey.

10. Type the end command into the terminal to go back to the Privileged EXEC mode. Press the Enter

key.

Note

If you forgot to create a router ID on switch B, you can go back in the configuration

mode and create one even if you performedthe configurations:

11. Type the configure terminal command into theterminal. Press the Enter key.

12. Type the router ospf command into theterminal. Press the Enter key.

13. Type the router-id 2.2.2.2 command into theterminal. Press the Enter key.

14. Type the end command into theterminal to go back to the Privileged EXEC mode on switch B.

Press the Enter key.

15. This is how you canverify if the configuration was successful on both switches:

16. Type the show ip ospf neighbor command into theterminal (in switch A and switch B)to display

the OSPF neighbor information list (verify the adjacency on switch A and B, between switch A and

switch B on area 0). Press the Enter key.

17. Type the show ip ospf database command into the terminal (in switch A and switch B) to display

the OSPF Link State Database. Press the Enter key.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.