Cambium Networks cnMatrix EX2028 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 188 van 320

L3 Features 188

1. Type the configure terminal command into theterminal. Press the Enterkey.

2. Type the interface gigabitethernet 0/9 into theterminal to select the interface to be configured.

Press the Enter key.

3. Type the shutdown command into the terminal to disable a physical interface. Press the Enter key.

4. Type the no switchport command into theterminal toconfigure the interface asrouted-

interface.Press the Enter key.

5. Type the no shutdown command into theterminal to enable a physical interface. Press the Enter

key.

6. Type the ip address 192.168.1.1 255.255.255.0 command into theterminal to set the IP address of an

interface. Press the Enter key.

7. Type the exit command into theterminal to go back to the configuration mode. Press the Enter

key.

8. Type the router ospf command into the terminal to enable the OSPF routing process and toenter

the configuration router mode. Press the Enter key.

9. Type the router-id 1.1.1.1 command into theterminal to set the router ID for the OSPF process. Press

the Enter key.

10. Type the network 192.168.1.1 255.255.255.0 area 0.0.0.0 command into theterminal to define the

interface on which the OSPF feature runs and the area idea for the select interface. Press the Enter

key.

11. Type the end command into theterminal to go to the Privileged EXEC mode on switch A. Press

the Enterkey.

SWITCH B

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.