Cambium Networks cnMatrix EX2028 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 146 van 320

L2 Features 146

l

Updating the switch port mode automatically updates the port acceptable traffic type

setting. A switch port mode setting of ‘access’ causes the acceptable traffic type to be set

to ‘untagged’. Other switch port mode settings (i.e., ‘hybrid’, ‘trunk’) cause the acceptable

traffic type to be set to ‘all’.

l

Actions that are referenced by a policy cannot be deleted. Action can be modified, even

when referenced. Modification of a referenced action causes the associated policy to be

reapplied (if it is still applicable).

l

A maximum of 100 actions can be defined.

l

An interface uplink list (uplink option) is comprised of 1 to 4 comma-separated interfaces

identified using the interface type and slot/port convention (e.g., ‘Gi0/9,gi0/10,Ex0/1’).

l

The reset-link action modifier is treated as a no-op if the action does not modify the PVID.

l

If reset-link is enabled and the action updates the PVID, the show output indicates the

reset-link status through the PVID display (“Link Reset Enabled”).

l

Action options that are not applicable to certain platforms (e.g., poe-priority, Cambium-

Sync) may be specified but are ignored when the action data is applied.

7. Type the pba policy (or auto-attach) policy cnPilot_APs match rule cnPilot_AP set action AP_

VLANs precedence 5 command into the terminal to configure PBA/Auto-Attach policy

information. Press the Enter key.

Note:

AP_VLANs = unique action name.

vlan 100, 101 = list of VLANs to be created.

pvid 100= pvid value; this has to bea value specified in the VLAN list.

8. Type the end command into the terminal to go to the Privileged EXEC mode. Press the Enterkey.

9. Type the pba rule (or show auto-attach rule) command into theterminal to display PBA/Auto-

Attach rule information. Press the Enterkey.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.