Cambium Networks cnMatrix EX2028 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 104 van 320

L2 Features 104

l

IEEE 802.3af

l

IEEE802.3at

l

IEEE802.3bt (only on EX2016M-P and TX2020R-P and TX2012R-P)

Scaling Numbers

N/A

Limitations

N/A

Default Values

l

The PoE feature is enabled by default, both globally and per-port.

l

The power inline priority is set to low by default.

How to Enable PoE in CLI Interface

1. Type the config terminal command into the terminal. Press the Enter key.

2. Type the set poe enable command into the terminal to enable PoE module on the switch. Press the

Enterkey.

3. Type the end command into the terminal to go back to Privileged EXEC mode. Press the Enter key.

4. Type the show power detail command into the terminal to display the PoE power supply status.

Press the Enterkey.

For more information, see Power over Ethernet Parameters and Commands.

Configuring PoE priority (example)

PoE priority can be configured on a per-port basis. Available options are: critical, high, and low.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.