Cambium Networks cnMatrix EX2010-P Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 35 van 320

L2 Features 35

Configuring Port-Based VLAN (Example)

1. Type the configure terminal command into the terminal. Press the Enter key.

2. Type the vlan 2 command into theterminal to configure a VLAN. Press the Enter key.

3. Type the exit command into theterminal to go back to the global configuration mode. Press the

Enter key.

4. Type the interface gigabitethernet 0/2 command into the terminal to select the interface to be

configured. Press the Enter key.

5. Type the switchport acceptable-frame-type untaggedAndPrioritytagged command into the

terminalto set the acceptable frame type for the port. Press the Enter key.

6. Type the switchport mode access command into theterminal to configure theVLAN port mode.

Press the Enter key.

7. Type the switchport access vlan 2 command into theterminal to set port as an untagged member

port of a VLAN. Press the Enter key.

8. Type the exit command into theterminal to go back to the global configuration mode. Press the

Enter key.

9. Type the vlan 2 into theterminal to enter the configuration vlan mode. Press the Enter key.

10. Type the ports gigabitethernet 0/1 untagged gigabitethernet 0/1 command into theterminal to

configure port list for VLAN 2. Press the Enter key.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2010-P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.