Cambium Networks cnMatrix EX2010-P Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 34 van 320

L2 Features 34

How to Create a VLAN in CLI Interface

Type the config terminal commandinto the terminal. Press theEnter key.

1. Type thevlan 50command into theterminal to configure a VLAN. Press theEnter key.

2. Type the ports add gigabitethernet 0/3 untagged gigabitethernet 0/3 command into theterminal

to configure port list for a VLAN. Press theEnter key.

3. Type the end commandinto theterminal to go back to thePrivileged EXEC mode. Press theEnter

key.

4. Type the show vlan id 50 command into the field to display the VLAN global status for the

specified VLAN. Press theEnter key.

5. Type the show vlan port gigabitethernet 0/3 command into the field to display the interface

information. Press theEnter key.

For more information, see VLAN Parameters and Commands.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2010-P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.