Cambium Networks cnMatrix EX2010-P Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 173 van 320

L3 Features 173

How to Enable Routed Interfaces in CLI Interface (Example 2)

1. Type the configure terminal command into the terminal. Press the Enterkey.

2. Type the interface gigabitethernet 0/3 command into the terminal to select the interface to be

configured. Press the Enterkey.

3. Type the shutdown command into the terminal to disable the interface. Press the Enterkey.

4. Type the no switchport vid 4090 command into the terminal to set the port(interface) as a routed

port. Press the Enterkey.

5. Type the no shutdown command into the terminal to enable the interface. Press the Enterkey.

Note:

Once a VLAN ID is used for a Router port it cannot be used when creating a new VLAN and

consequently, once an ID is used for a VLAN, the same ID cannot be used when creating a

Router port.

How to show Routed Ports using show VLAN command

Type the show vlan command into the terminal. Press the Enterkey.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2010-P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.