Handleiding
Je bekijkt pagina 11 van 35
INSERT TRA
Y
STEP
PROG PICTURE
CROISSANT
END OF COO KING PROGRA M
00:18’:30”
Cooking complete Current
cooking cycle
(less than 1 min. remaining)
Current cooking cycle
(more than 1 min. remaining)
OVEN TEMPERATURE
175°C
cooking by
time
cooking
continues
11
OVEN TEMPERATURE
175°C
END OF COOKING PROGRAM
NEVER
END OF COOKING PROGRAM
00:18’:30”
SET
PREHEATING
Set preheating temperature
PREHEATING
180°C
TEMPERATURE
120°C
Current oven cavity temperature
SET
SET
SET
PREHEATING
PREHEATING
EP
11//1
PREHEATING
180°C
PREHEATING
180°C
TEMPERA TURE
120°C
1
TEMPERA TURE
180°C
2
NSERT TRAY
END OF COOKING PROGRAM
1’:30”
CROISSANT
CROISSANT
PROG PICTURE
SAVE
6
SAVE
7
8
PROGRAMS
PAGE 1/25
CAKE
CROISSANT
CROISSANT
PROG 6/6
9
10
CROISSANT
CAKE
PROGRAMS
PAGE 1/25
OVEN TEMPERATUR E
175°C
CROISSANT
CROISSANT
OVENS
SET
3
6
Tap the “
PROG PICTURE
” icon
7
Choose the photo to go with the recipe.
8
Press the "
SAVE
" key to save the recipe.
9
The recently saved program is automat- ically
stored in the last position, after the other
programs already in the memory
.
The screen shows the "CROISSANT" rec- ipe has
been added and saved.
To use the saved cooking cycles, ac- cess the
"
PROGRAMS
" section section "Oven
Programs Menu" on page
13
You do not need to assign a name and photo
to the recipes that you want to
save. In this case, instead of the recipe name, the
word "PROG" and a number will appear. Again, the
program is automatically saved in the last position,
after the other programs already in the memory
.
10
Press the "
START/STOP
" icon: cooking will start
with the set parameters.
F
COOKING IN PROGRESS
1
If the cooking cycle requires preheating, the oven
starts to heat the cavity to bring it to the set
temperature (in the example: 180°C). DO NOT
place the dishes in the oven during this phase.
To skip preheating see section
"Skip a
preheating cycle in progress"
on page 17
2
At the end of preheating, the oven beeps and the
screen shown (INSERT TRAY) appears. You
should now put the food in the oven. When the
door is closed, step 1 automatically starts
according to the set parameters.
3
During the cooking cycle, the time re- maining
until the cycle is complete is shown on the
screen (in the example: 12 minutes and 6
seconds), as well as the temperature (in the
example: 180°C).
To view or change the parameters of a cooking
cycle in progress (e.g. lower the temperature or
extend the time), see
section View/modify
the parameters of a cooking cycle or
preheating in progress on
page 12
If you want to stop the cooking cycle in
progress, hold down the
"START/ STOP"
button
(approximately 4-5 sec- onds)
.
Bekijk gratis de handleiding van Cadco XC606, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cadco |
| Model | XC606 |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 9859 MB |
