Handleiding
Je bekijkt pagina 9 van 18
9
STARTING COOKING/SAVING COOKING
After having set the cooking parameters (duration
and time), you can:
-
directly start the cooking: at the end of cooking
the set parameters will NOT be saved;
-
s a v e t h e s e t c o o k i n g a n d t h e n s t a r t c o o k i n g : a t t h e
end of cooking, the set parameters are saved
and the recipe can be
used again subsequently
whenever need
ed without having to pre-set the
parameters each time.
Directly start cooking
Press the “START/STOP” icon: cooking starts
with the set parameters and all the red LEDs
of the positions turn off.
Save cooking and then start it
If you want to save the recipe before starting
it,
search for a free position by looking at the
LEDs:
free position: LED not turned on (e.g. P7)
occupied position: LED turned on (e.g. from P1 to
P6).
NOTE: if you select this although it is occupied,
you will overwrite the recipe previously saved
and will delete it irreversibly.
NOTE: To select positions from P12 to P99, press
P12 for 5 sec. (it will start flashing), press the
"+" key repeatedly until the screen shows the
desired position, then press it for 5 seconds to
save the recipe.
Press the selected button for 5 seconds: you
will hear a beep indicating that the cooking is
saved.
Press the "
START/STOP" icon to start cooking.
COOKING IN PROGRESS!!!!
If the cooking requires a pre-heating, the oven starts to heat the oven cavity to bring it to the set temperature (in the
example 192°C). DO NOT place the food in the oven during this phase.
At the end of the preheating, the oven emits a beep and the oven LED light flashes: it is time to cook the food. When the
door is closed, STEP 1 automatically starts according to the set parameters.
During cooking the set parameters are seen on the screen when the icon of interest it touched:
shows the set cooking time alternating with the time remaining until the end of cooking;
shows the set oven cavity temperature alternating with the current temperature.
The set temperatures can be changed at any time by acting as explained on the previous page (points
from
to
6
). Cooking ends at the end of the set time, if you want to interrupt cooking before the
end of the set time, hold down the "
START/STOP" button.
COOKING END
At the end of the cooking, the oven emits a beep and the oven light flashes: the food is ready. The light turns off when the
door is opened.
D
1A
1B
2B
3B
E
4
5
6
3
F
D
E
1A
5
4
6
2B
5 sec.
1B
1A
_
_
3B
Bekijk gratis de handleiding van Cadco Bakerluxaft-04FS-LD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cadco |
| Model | Bakerluxaft-04FS-LD |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 4074 MB |
