Bushnell R5 handleiding

Niet gecategoriseerd

Bushnell

33 pagina's

PDF beschikbaar

Handleiding

Click to return to the Table of Contents.

STORAGE

Avoid storing the scope in hot places, such as the passenger compartment of a vehicle on a hot day. The high temperature could adversely affect the

lubricants and sealants. A vehicle’s trunk, a gun cabinet or a closet is preferable. Never leave the scope where direct sunlight can enter either the

objective or the eyepiece lens. Damage may result from the concentration (burning glass effect) of the sun’s rays.

CARING FOR YOUR RIFLESCOPE

Your scope needs very little maintenance. Exterior metal surfaces should be kept clean. A light dusting with a slightly dampened soft cloth is enough

in most cases.

Your new scope features windage and elevation turrets that are completely sealed against water intrusion. However, we recommend that you keep

the windage and elevation caps on the turrets, except when adjusting, to prevent dust and dirt from collecting in the turret area.

We also recommend that lens covers, or a scope cover of some type, be kept in place when the scope is not being used. Lenses should be inspected

regularly and always kept clean. Dust, dirt, and fingerprints that collect on the lens surfaces will severely degrade image quality, and if left unclean

for long periods, the anti-reflection coating could be damaged. Although lens cleaning is not difficult, it does require care and some patience.

› If there is heavy soiling like from dried mud, low-pressure clean water should be used to flush the debris away.

› Start with a lens brush or a small, unused soft bristle hobby paintbrush or makeup application brush. Gently whisk away loose

dirt particles.

› Next, use an ear syringe or bulb aspirator (available in most drug stores) to blow remaining dirt or dust from lens surfaces. Do not

use pressurized air like from an air duster can or air compressor.

› If further cleaning is needed, use a dry, soft lint-free cloth. Very gently wipe the lens, starting at the center using a circular motion,

then working outward to the edge. If this has not correct the problem, repeat the process using condensation from your breath.

WARNING: UNNECESSARY RUBBING OR USE OF A COARSE CLOTH MAY CAUSE PERMANENT DAMAGE TO THE

LENS COATINGS.

MAINTENANCE

Your riflescope, though amazingly tough, is a precision instrument that deserves reasonably cautious care.

›

When cleaning the lenses, first blow away any dry dirt and dust, or use a soft lens brush. Fingerprints and lubricants can be wiped off with lens

tissue, or a soft clean cloth, moistened with lens cleaning fluid.

›

All moving parts of the scope are permanently lubricated. Do not try to lubricate them.

›

Little to no maintenance is needed for the scope’s outer surface. Black oxide screws are sometimes used to seal purge ports and/or for the

power-change-ring to erector connection If the scope is exposed to water, consider applying a thin film of typical firearm oil to these screws

during routine firearm maintenance to mitigate corrosion.

›

Use lens covers, if available and whenever convenient.

ALTITUDE AND TEMPERATURE

Ballistic charts published by ammunition manufacturers are based upon standard sea level conditions. When sighting in, it is well to keep in mind

that altitude and temperature affect trajectory. It is best to sight-in under the same conditions in which you will be hunting.

SKU

Mag x Obj. Diam.

Reticle

Turrets

Total Elevation

Total Windage

Travel per Rev

Main Tube Diameter (in)

Average Eye Relief (in/mm)

Field of View

ft @ 100 yds

m @ 100 m

Length (in/mm)

Weight (oz/g)

R5-3940S9 3-9x40 Illuminated

Multi-X

Capped 80 MOA 80 MOA 15 MOA 1 3.9/100 35ft - 12ft/11.7m - 4m 11.5/292 19.5/553

R5-3950S9 3-9x50 Illuminated

Multi-X

Capped 80 MOA 80 MOA 15 MOA 1 3.9/100 35ft - 12ft/11.7m - 4m 12.3/313 21.7/614

TECHNICAL SPECIFICATIONS

Bekijk gratis de handleiding van Bushnell R5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.