Bushnell First Strike 2.0 handleiding

Handleiding

123456789101112131415161718/ 18

Afdrukken

Je bekijkt pagina 4 van 18

4

MOUNTING YOUR SCOPE

Your new scope, even with its technologically advanced design and features, will not perform at its best if not properly

mounted. One of the most important contributing factors to the accuracy of your scope and rifle is the selection of the

mount and the care with which mounting is done. Dependable mounts that attach your scope solidly to the rifle will reward

you with dependability and consistent accuracy. You should take as much care in selecting a mounting system as you did

in selecting your scope.

Remember, not all scopes are compatible with all mounts on all rifles. If there is any doubt in your mind, you should seek

the advice of your local retailer or gunsmith.

WARNING: A RIFLESCOPE SHOULD NEVER BE USED AS A SUBSTITUTE FOR EITHER A BINOCULAR OR

SPOTTING SCOPE. IT MAY RESULT IN YOU INADVERTENTLY POINTING THE GUN AT ANOTHER PERSON.

PRELIMINARY SCOPE ADJUSTMENTS

Before installing the scope, we recommend you set the focus of the eyepiece to fit your individual visual requirement.

Refocusing the ocular distance will result in a sharper reticle focus, an improved optical image, and will help to avoid eye

fatigue when using the scope over prolonged periods of time. To refocus, hold the scope about 3 to 4 inches from your

eye and point at the open sky or other flatly lit area such as a monotone painted wall.

Quickly glance into the scope. If the reticle appears blurred at first glance, it is out of focus. Turn

the eyepiece clockwise or counter clockwise several turns. Glance into the scope again to check

the sharpness of the reticle. Remember to take quick glances, as the eye will compensate for

slightly out of focus conditions with prolonged looks. If the reticle still appears blurred, turn the

eyepiece another two or three turns. Repeat this procedure until the reticle is sharp and clearly

defined.

Unless your eyes undergo a significant change over the years, you will not have to make this

adjustment again.

VARIABLE POWER ADJUSTMENTS

To change magnification, fold the Throw Down PCL (Power Change Lever) out and use it to

rotate the Power Selector Ring so the desired number on the power scale is aligned with the

Index Dot (3x in the photos). For even more rapid power change operation, unscrew the top half

PARTS GUIDE

Throw Down PCL (Short)

Throw Down PCL (Long*)

* Short Lever pre-installed, Long Lever

included in box

Elevation Adjustment

(capped turret example)

Brightness Adjustment/Battery Compartment

(illuminated models only)

Model# AR71624I

Elevation Adjustment

(capped turret example)

Brightness Adjustment/Battery Compartment

(illuminated models only)

Elevation Adjustment

(exposed/target turret example)

Windage Adjustment

Ocular Lens

Fast Focus

Eyepiece

Power Change Ring

Objective Lens

Side Focus (2-7, 3-12x and 4.5-18x

models only)

Throw Down Power Change Lever (Short)

Model# AR731240

123456789101112131415161718/ 18

Bekijk gratis de handleiding van Bushnell First Strike 2.0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd