BSS Audio ATEM Mini Extreme handleiding
Handleiding
Je bekijkt pagina 26 van 75
Page 51
Operating instruction EN DOC-000001
Monitor settings
ATEM Mini Economic
ATEM Mini's monitor is turned on and o using the main switch on the case. All
necessary menu settings can be set using buttons on the right side of the mon-
itor base. For advanced settings, please refer to the monitor's operating in-
structions included in the scope of delivery.
ATEM Mini Basic /- Professional
The eld monitor in the case for the ATEM Mini Basic or Professional has its own
power switch on the top right of the monitor. This must also be actuated after
switching on the main switch.
ATEM Mini Extreme
ATEM Mini's monitor is turned on and o using the main switch on the case. All
necessary menu settings can be set using buttons on the right side of the mon-
itor base. For advanced settings,
please refer to the monitor's op-
erating instructions included in
the scope of delivery.
The inclination of the monitor
can be ergonomically adjusted to
the right viewing angle by open-
ing it. (Image 23) To do this, hold
the monitor in the middle of the
upper frame and loosen it from
the two holding magnets with a
slight tug.
Before closing the case lid, return the monitor to its original position. Both magnets
must be securely contacted.
(Image 23) Monitor detached from the
magnetic holder
DE
EN
FR
IT
ES
Page 50
BSS-Streaming Service BSS-Case
1.5 A load. Loads exceeding this should be avoided in order to ensure safe
switching between mains and battery voltage.
Backup fuse
Glass tube fuse 5x20mm; 5.0A; trigger characteristic: FAST
Reverse polarity protection
The built-in Case on-board electronics have reverse polarity protection. In rare
cases, it can be the case with vehicle on-board voltage sockets that these lead
to ground (-) on the pin contact instead of +12V. If, after connecting the case to
an on-board voltage socket, no function of the devices is apparent, please
check this possibility as well.
Using the adapter cable ART-000326 with its open cable end, various customer-
specic plugs can be assembled for connection to a 12V DC voltage source.
Please note that all plugs or connecting elements used must be approved by
the manufacturer for at least 5A continuous current.
Pay attention to the type of attachment described by the manufacturer in or-
der to minimize contact resistance and ensure a safe current ow.
Wire color at the open end: brown = +12V ; blue = ground
3/8" mount (ATEM Mini option)
The case can be attached to tripods, tubes and the like via the 3/8 inch attach-
ment on the bottom of the hous-
ing.
It is attached using a 3/8 inch UNC
thread, which is a common type
of attachment in photo and video
technology.
The minimum screw-in depth is
15mm, the maximum tightening
torque (with lock nut) is 15Nm.
The maximum load values of the
case when assembled can be
taken from the following sketch.
These are 75N from the vertical at the front and side edges.
(Image 22) Max. load: F = 75N
Bekijk gratis de handleiding van BSS Audio ATEM Mini Extreme, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BSS Audio |
| Model | ATEM Mini Extreme |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 23145 MB |
