BSS Audio ATEM Mini Extreme handleiding
Handleiding
Je bekijkt pagina 18 van 75
Page 35
Operating instruction EN DOC-000001
• If foreign bodies / liquids have penetrated through the ventilation openings
of the BSS case, pull out the power plug immediately and contact our ser-
vice department.
• To avoid scratches, place a soft, thin cloth between the screen and the
ATEM Mini during storage and transport.
• Store the BSS case in a dry and clean environment.
• Have the case repaired only by qualied specialists and only with original
spare parts.
• Do not use the case again if the on / o switch is defective, the fan is not
operating or any other built-in component or part is defective.
• As long as no ATEM Mini or ATEM Mini Extreme is installed in the case, there
is a risk of tipping over due to the changed center of gravity. Therefore,
when opening the cover, hold the case in a horizontal position with the
help of a second person until the installation is complete.
• Current information can be found at:
https://bss-streamingservice.de/en/download/
Proper use
The BSS case is intended to transmit and record live streams with proper use of
the available connection options of a built-in ATEM Mini in dry, clean and dust-
free environments. The correct position for the case while in use is only in a ly-
ing position with the lid open.
DE
EN
FR
IT
ES
Validity
These instructions apply to the following BSS case models and their options.
Safety instructions
Please read all instructions and illustrations prior to the initial use of your de-
vice. Proceed accordingly. Non-observance of the operating instructions and
safety notes can lead to electric shock, re or serious injuries!
Unless otherwise stated, the instructions and safety information apply to both
the ATEM Mini case and the ATEM Mini Extreme case.
• Only use the case lying down with its lid open and in consideration of the
ambient conditions.
• Do not use the BSS case in the rain or under the inuence of water or hu-
midity.
• Do not open the screwed covers or aps.
• Keep the case dry and clean.
• Do not lean on the ATEM Mini cover plate in the case.
• Avoid impact or excessive pressure on the case and its components.
• Always disconnect the case from the power supply after use by rst discon-
necting the components using the on / o switch and then pulling the
power plug.
• Only use connection devices that are compatible with the connection val-
ues of the ATEM Mini and the monitors used. Further information can be
found in the operating instructions of the respective manufacturers.
model name Item number from model year
BSS-Case Economic ART-000252 03/2022
BSS-Case Basic ART-000033 05/2021
BSS-Case Professional ART-000129 05/2021
BSS-Case SDI ART-000360 10/2022
BSS-Case Extreme ART-000247 04/2022
BSS-Case Professional Extreme ART-000277 04/2022
BSS-Case Extreme SDI ART-000379 12/2022
Page 34
BSS-Streaming Service BSS-Case
Bekijk gratis de handleiding van BSS Audio ATEM Mini Extreme, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BSS Audio |
| Model | ATEM Mini Extreme |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 23145 MB |
